El Cajon, California Fire Extinguishers

Portable, wheeled or fixed unit fire extinguishers are an invaluable tool that every occupied building should install and properly service aiding in the containment, suppression or extinguishing of small fires in El Cajon, California.

Fire Extinguisher Service
Fire Extinguisher Service in El Cajon, California

Fire extinguishers require service, maintenance, tests, inspections, annual service, (6) six year teardowns, refills and recharging that should be completed by qualified, factory authorized, certified fire extinguisher companies that are actively licensed in the State of California and City of El Cajon. Certified fire extinguisher companies have proven a level of knowledge, skill and experience for additional assurances.

The fire extinguisher company should use only manufacturer recommended replacement parts when performing recharge, service & repairs on portable, wheeled or fixed unit fire extinguishers in El Cajon, California.

• Fire Extinguisher Service Plan in El Cajon, California

• Fire Extinguisher Service & Maintenance in El Cajon, California

Periodic Inspections | Monthly Inspections
Fire Extinguisher Service in El Cajon, California

[NFPA-10] Periodic inspection of fire extinguishers shall include a check of at least the following items:
1. Location in designated place.
2. No obstruction to access or visibility.
3. Pressure gauge reading or indicator in the operable range or position.
4. Fullness determined by weighing or hefting for self-expelling-type extinguishers, Cartridge-operated extinguishers, and pump tanks.
5. Operating instructions on nameplate and facing outward.
6. Safety seals and tamper indicators not broken or missing.
7. Examination for obvious physical damage, corrosion, leakage, or clogged nozzle.

Annual Service, Tests, Inspections & Certification Tag
Fire Extinguisher Service in El Cajon, California

The fire extinguisher company in El Cajon, California should service the fire extinguishers according to manufacturer specifications, federal, state, OSHA, safety, fire codes or any other applicable government agency or insurance company requirement in El Cajon, California.

Six (6) year service & teardowns, annual inspections & service, tests, inspections, refills, recharges and fire extinguisher certification tags should be performed by a fire extinguisher company that is factory authorized, certified, actively licensed in the State of California and City of El Cajon for fire extinguisher service. Certified fire extinguisher companies have proven a level of knowledge, skill and experience for additional assurances.

Physical, Visual & Mechanical Inspections
Fire Extinguisher Service in El Cajon, California

Annual maintenance for a fire extinguisher is more than just reading a pressure gauge. Annual inspections may include the possible replacement of horns, valves, collars, o-rings, defective gauges, damaged hoses, frozen gauges or missing pins.

If the extinguisher was discharged or the indicator displays recharge, refilling the extinguisher contents may be necessary during the course of the annual tests and inspections conducted by authorized, qualified actively licensed fire extinguisher company in El Cajon, California before annual certification tags are issued.

Why Recharge a Fire Extinguisher in El Cajon, California

Excerpt to Aid in Understanding the Annual Maintenance & Inspection of Fire Extinguishers.

Below is a typical service procedure that should be completed by a factory trained and qualified fire extinguisher company in El Cajon, California for an Amerex Brand Fire Extinguisher No. 05602.

(Amerex Owners Manual# 05602, Stored Pressure Dry Chemical Fire Extinguishers)

1	Clean extinguisher to remove dirt, grease or foreign material. Check to make sure that the instruction nameplate is securely attached and legible. Inspect the cylinders for corrosion, abrasion, dents or weld damage. If any damage is found, hydrostatically test in accordance with instructions in CGA C-1 and C-6 and NFPA 10.
2	Inspect the extinguisher for damaged, missing or substitute parts. Only factory replacement parts are approved for use on Amerex fire extinguishers.
3	Weigh the extinguisher and compare with weight printed in the "Maintenance" section on the nameplate (label). Recharge extinguisher if weight is not within indicated allowable tolerances.
4	Check the date of manufacture printed on the extinguisher label (nameplate) or on the agent cylinder dome. The agent cylinder must be hydrostatically tested every 12 years to the test pressure indicated on the nameplate.
5	Visually inspect the pressure gauge: If bent, damaged or improper gauge, depressurize and replace If pressure is low, check for leaks If over pressurized (overcharged), depressurize the extinguisher and follow recharge instructions.
6	Check ring pin for freedom of movement. Replace if bent or if removal appears difficult.
7	Inspect discharge lever for any dirt or corrosion which might impair freedom of movement. Inspect carrying handle for proper installation. If lever, handle or rivets are damaged replace with proper Amerex part(s).
8	Install new tamper seal if broken and record service data on the extinguisher inspection tag.
9	Remove nozzle or hose and horn assembly and visually inspect inside valve body. (Chemical in the valve body may indicate that the extinguisher has been partially discharged and should therefore be recharged). Inspect nozzle or the hose & horn assembly for damage – replace as necessary. Blow air through nozzle or hose and horn to insure passage is clear of foreign material.
10	Inspect the valve assembly for corrosion or damage to hose thread connection. Replace valve assembly or component parts as necessary following the proper depressurization and recharge procedures. If valve removal is necessary, complete all steps in the Recharge Procedure.
11	Install nozzle or hose and horn assembly.
12	Replace the extinguisher on the wall hanger or in the vehicle bracket making sure that it fits the bracket properly and the bracket is securely attached – replace the bracket if necessary.